Publications of Polymer processing Department

Research People Equipment Publications


The most recent papers:

Starý Z., Krückel J.
Conductive polymer composites with carbonic fillers: shear induced electrical behaviour
Polymer. Roč. 139, 2018, s. 52-59

Paruzel A., Michalowski S., Hodan J., Horák P., Prociak A., Beneš H.
Rigid polyurethane foam fabrication using medium chain glycerides of coconut oil and plastics from end-of-life vehicles
ACS Sustainable Chemistry & Engineering. Roč. 5, č. 7 (2017), s. 6237-6246

Beneš H., Paruzel A., Trhlíková O., Paruzel B.
Medium chain glycerides of coconut oil for microwave-enhanced conversion of polycarbonate into polyols
European Polymer Journal. Roč. 86, 2017, s. 173-187

Kratochvíl J., Kelnar I.
Non-isothermal kinetics of cold crystallization in multicomponent PLA/thermoplastic polyurethane/nanofiller system
Journal of Thermal Analysis and Calorimetry. Roč. 130, č. 2 (2017), s. 1043-1052

Giel V., Perchacz M., Kredatusová J., Pientka Z.
Gas transport properties of polybenzimidazole and poly(phenylene oxide) mixed matrix membranes incorporated with PDA-functionalised titanate nanotubes
Nanoscale Research Letters. Roč. 12, č. 1 (2017), s. 1-15, č. článku 3

Perchacz M., Beneš H., Zhigunov A., Serkis M., Pavlova E.
Differently-catalyzed silica-based precursors as functional additives for the epoxy-based hybrid materials
Polymer. Roč. 99, 2016, s. 434-446

Špírková M., Hodan J., Serkis-rodzen M., Kredatusová J., Zhigunov A., Kotek J.
The effect of pre-set extension on the degree of hydrolytic degradation in multicomponent polyurethane elastomers
Polymer Degradation and Stability. Roč. 142, 2017, s. 69-78

Paljevac M., Kotek J., Jeřábek K., Krajnc P.
Influence of topology of highly porous methacrylate polymers on their mechanical properties
Macromolecular Materials and Engineering. Roč. 303, č. 2 (2018), s. 1700337_1-1700337_8

Špírková M., Kredatusová J., Hodan J.
The impact of conditions mimicking physiological environment on the thermal stability of aliphatic polycarbonate-based polyurethane elastomers
Journal of Thermal Analysis and Calorimetry. Roč. 128, č. 3 (2017), s. 1699-1709

Beneš H.
Book of Abstracts and Programme
Prague: Institute of Macromolecular Chemistry, Czech Academy of Sciences, 2017. 82 s. ISBN 978-80-85009-89-7
Workshop on Green Chemistry and Nanotechnologies in Polymer Chemistry /8./. Prague, CR, 6.-8.9.2017

Kelnar I., Hodan J., Kaprálková L., Kratochvíl J., Hromádková J., Kotek J.
J-integral evaluation of nanoclay-modified HDPE/PA6 microfibrillar composites
Polymer Testing. Roč. 58, 2017, s. 54-59

List of papers

Otto Wichterle Centre of Polymer Materials and Technologies - CPMTOW

Centre of Biomedicinal Polymers - CBMP

Centre of Polymer Sensors - CPS

Polymers for Power Engineering - Energolab


Institute of Macromolecular Chemistry AS CR
Heyrovského nám. 2
162 06 Prague 6
Czech Republic
tel:+420 296 809 111
fax:+420 296 809 410

Strategie 21

Molekuly a materiály pro život